Acidity Salt Spray Environmental Test Chambers 220V 15A For Automotive Aerospace

1.The salt spray test chamber is a testing device used to simulate the effects of salt spray or fog on various materials and components. It is commonly used in the automotive, aerospace, and marine industries to evaluate the corrosion resistance of coatings, paints, and metals.
2.The chamber typically consists of a sealed enclosure where a salt solution is atomized and sprayed onto the test specimen. The temperature and humidity inside the chamber are controlled to create a corrosive environment that accelerates the corrosion process. The length of the test and the severity of the conditions can be adjusted to simulate various environmental conditions.

Function:

• Salt spray, drying, wetting, soaking, constant temperature and humidity test
• Salt spray testing machine is suitable for surface treatment of various materials, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil, as if after treatment to test the corrosion resistance of their products.

​Features:

• The whole set is made of imported PVC board, with strong structure, never deformation, and acid and alkali resistance to high temperature and never change
• Automatic/manual water filling system, with automatic/manual water filling function when water level is insufficient, the test is not interrupted, the water level is insufficient warning display.
• Precision glass nozzle fog diffusion evenly, and naturally fall on the test piece, to ensure no crystal salt blocking.
• The control instrument is on the same machine board, easy to operate, and clear at a glance.
• With double overtemperature protection, water level insufficient warning, to ensure safe use.
• Imported temperature controller with manual and automatic control mode, using digital display, PID control, error ±0.1℃, maximum setting time up to 999hrs.
• Direct steam heating method is adopted in the laboratory, which can increase temperature quickly and evenly and shorten standby time.
• The spray tower is attached with a conical dispersion device, which can guide the fog, adjust the fog amount and evenly fall the fog.
• The pressure drum is heated and humidified according to Henry's law, and provides the humidity required by the laboratory.
• The upper cover of the test tank for large scale machine is automatically opened and closed by pneumatic cylinder, which is easy to operate and safe.
• After the test is completed, it has an automatic defogging device, which can clearly observe the samples in the test room.
• Standard of use: CNS3672,3885,4159,7669,8886/ JIS D-0201,H-8502,H-8610,K-5400,Z-2371/ ISO3768,3769 / ASTM B-117,B-268 / GB-T2423 / GJB150